Skip to content

Odroid H3+

2 334 kr
American Express
Apple Pay
Mastercard
PayPal
Visa

Getting Started with Odroid H3 and H3+

Odroid H3+ features the same form factor as Odroid H2+ but this new version is a high-performance and more powerful SBC. Odroid H3+ uses the 3.3GHz Intel Celeron N6005 CPU, high-performance I/O ports, and support for large dual-channel RAM. It is a 64-bit x86 Single Board Computer with the following hardware components:

Odroid H3+ Hardware Layout

Video Presentation of the Product

Specifications of Odroid H3+

Processor

  • Intel Celeron N6005
  • 3.3 GHz Quad-Core
  • Intel UHD Graphics, 900 MHz 24/32 EU
  • L2 Cache 4MB
  • TDP 10W, 10nm

RAM Support

  • SO-DIMM Slots for DDR4 (x2) | 1.2V
  • Support for up to 64GB of Total Memory
  • Up to 2933 MT/sec. Dual Channel | DDR4-PC23400
  • H3 Does Not Support DDR5 and DDR3

Storage Support

  • eMMC Socket (x1) | Selectable and Bootable on BIOS
  • 2 Slot (x1) | Supports 4x PCIe 3.0 and NGFF-2280 card
  • SATA3 6.0 GB/s Data Connectors (x2)
  • H3 does NOT support M.2 SATA SSD

Networking

  • RJ45 LAN Ports (x2) GbE Ethernet Support 10/100/1000/2500 Mbps
  • Realtek RTL8125B
  • Wake-On-Lan Support
  • LED Indicators (Amber for Traffic and Green for Link)

Video

  • Supports simultaneous dual display
  • HDMI 2.0 Port (x1) supports up to 4K @60Hz
  • DisplayPort DP 1.2 supports up to 4K @60Hz

Audio

  • SPDIF Out (x1) HAD and ALC1200 Codec Support
  • Audio Out Jack 3.5mm (x1)
  • DP and HDMI also support Audio Output

External I/O

  • USB 3.0 HOST Ports (x2)
  • USB 2.0 HOST Ports (x2)
  • Peripheral Expansion Header 2.54mm Pitch 24 PIN
  • DC 3.3V (x1)
  • DC 5V (x1)
  • GND (x5)
  • I2C (x2) SDA, SCL
  • UART (x1) | RTS, TXD, TXD, CTS
  • External Power Button (x1)
  • HDMI CEC, 5VA+
  • USB 2.0 Ports (x3)
  • All 3.3V I/O Signal Level

Power Input Compatibility

  • DC Power Jack 5.5mm Outer (-ve) and 2.1mm Inner (+ve) | DC 14V ~ 20V up to 60W
  • DC 19V / 7A Power Supply is recommended if you are using 2x 3.5” HDDs
  • DC 15V / 4A Power Supply is recommended if you are not using 2x 3.5” HDDs

Power Consumption

  • CPU Stress: ≃15W
  • CPU and GPU Stress: ≃18W
  • IDLE: ≃9W
  • Power OFF: ≃25W
  • Suspend: ≃6W

General Features

  • Passive Heatsink
  • BIOS Backup Battery for BIOS Settings and Time Tracking
  • Supports optional Active Cooling Fan (Not included)
  • Power Button
  • Reset Button
  • PWR LED (Red) while the DC power supply is connected
  • PMIC LED (Blue – Right) while the major power rails are at work
  • SLEEP LED (Blue - Left) while the system is in the Sleep Mode
  • NVMe LED (Green) flashed while NVMe is transferring data
  • SATA LED (Amber) flashes while DATA is transferring data

Odroid H3 Dimensions

  • 11cm x 11cm x 4.7cm | 110mm x 110mm x 47mm

Items Included

  • Odroid H3+

Compatible Products (Sold Separately)