Skip to content


808 kr
American Express
Apple Pay

ODROID-C2 was the first affordable 64-bit, ARM-based computer but the latest version of it is more efficient and faster in processing. ODROID-C4 introduces the Quad-Core Cortex-A55 cluster and is capable of running at 2.0 GHz. It comes with upgraded Mali-G31 MP2 New Generation Graphics Processing Unit. Its stock heat sink protects the thermal throttling by allowing it to run at full speed. Additionally, the two prominent features of ODROID-C4 are its faster CPU and faster RAM. Both run 40% and 50% faster respectively compared to ODROID-C2.

Hardware Components on ODROID-C4

  • Amlogic S905X3 CPU
  • 4 GiB DDR4
  • DC Power Jack (2.1mm inner and 5.5mm outer diameter)
  • 10/100/1000 M Ethernet Port RJ45
  • UAT for System Console (x1)
  • System Indicator LED (x2)
  • USB 3.0 Host Ports (x4)
  • Micro USB 2.0 OTG (x1)
  • IR Receiver (x1)
  • eMMC Module Socket (x1)
  • 7 Pin Audio Expansion Header
  • 40 Pin Expansion Header
  • Micro SD Slot (x1)
  • HDMI 2.0

Specifications of ODROID-C4



  • Amlogic S905X3 12nm
  • Mali-G31 MP2 GPU (650MHz) 4x Execution Engines
  • Architecture: ARMv8-A with Crypto and Neon extensions
  • 512KB L3 data cache, 512 sets 16-way set associative, 4 processors share 64-byte lines
  • 32 KB L1 data cache, 128 sets 4-way set associative, 1 processor shares 64-byte lines
  • 32 KB L1 instruction cache, 128 sets 4-way set associative, 1 processor shares 64-byte lines



  • 4GiB DDR4
  • But width: 32-bit
  • Data Rate: 2640 MT/s
  • Grade: PC4-21333
  • Low Power Design: 1.2Volt




  • 1x Micro SD Slot (Compatible with DS/HS mode and supports UHS-1 SDR104)
  • 1x eMMC Socket (eMMC module is NOT included)




  • 1x RJ45 GbE LAN Port | supports 10/100/1000 Mbps
  • Supports WiFi USB adapters (NOT INCLUDED)
  • RTL8211F Realtek Ethernet Transceiver
  • Green LED: 100Mpbs connection data traffic indicator
  • Amber LED: 1000Mpbs connection data traffic indicator
  • 128 sets 4-way set associative, 1 processor shares 64-byte lines



  • 1x HDMI 2.0 Port with HDR, EDID, CEC | up to 4K @ 60Hz



  • 1x HDMI Digital Audio Output
  • 1x SPDIF (OPTIONAL) Optical Output






External I/O


  • 1x OTG USB 2.0 Port for Device or Host Mode (DOES NOT support Power Input)
  • 4x HOST USB 3.0 Ports (Single Root Hub Shared)
  • 1x UART (Serial Console Debug)
  • 1x 2.54mm Pitch 40-Pin Peripheral Expansion Header
  • 8x GND
  • 1x 1.8V DC
  • 2x 3.3V DC
  • 2x 5V DC
  • 1x SPI
  • 2x I2C
  • 1x UART
  • 6x PWM
  • 2x 12-bit ADC input (up to 1.8V)
  • Up to 25x GPIO
  • 1x 7-Pin 2.54mm Pitch Audio Expansion Header
  • 1x I2S
  • 1x SPDIF Out
  • 1x 5V DC




  • IR receiver for infrared remote control
  • System Indicator LEDs
  • RED LED for PWR (DC Power Connected)
  • BLUE (Kernel is running)




  • 1x DC Power Jack: 5.5mm (negative / outer) and 2.1mm (positive / inner) diameter
  • 12V / 2A DC Power Adapter Recommended
  • 5.5V ~ 15.5V DC Input



Form Factor


  • Dimensions of the Heat Sink: 40mm x 32mm x 10mm | 4cm x 3.2cm x 1cm
  • Dimensions of the Board: 85mm x 56mm x 1.0mm | 8.5cm x 5.6cm x 1cm
  • Weight (including Heat Sink): 59 Grams | 0.059 Kg