ODROID-C4
Save Liquid error (snippets/product-badge line 32): Computation results in '-Infinity'%
ODROID-C2 was the first affordable 64-bit, ARM-based computer but the latest version of it is more efficient and faster in processing. ODROID-C4 introduces the Quad-Core Cortex-A55 cluster and is capable of running at 2.0 GHz. It comes with upgraded Mali-G31 MP2 New Generation Graphics Processing Unit. Its stock heat sink protects the thermal throttling by allowing it to run at full speed. Additionally, the two prominent features of ODROID-C4 are its faster CPU and faster RAM. Both run 40% and 50% faster respectively compared to ODROID-C2.
Hardware Components on ODROID-C4
- Amlogic S905X3 CPU
- 4 GiB DDR4
- DC Power Jack (2.1mm inner and 5.5mm outer diameter)
- 10/100/1000 M Ethernet Port RJ45
- UAT for System Console (x1)
- System Indicator LED (x2)
- USB 3.0 Host Ports (x4)
- Micro USB 2.0 OTG (x1)
- IR Receiver (x1)
- eMMC Module Socket (x1)
- 7 Pin Audio Expansion Header
- 40 Pin Expansion Header
- Micro SD Slot (x1)
- HDMI 2.0
Specifications of ODROID-C4
Processor
|
- Amlogic S905X3 12nm
- Mali-G31 MP2 GPU (650MHz) 4x Execution Engines
- Architecture: ARMv8-A with Crypto and Neon extensions
- 512KB L3 data cache, 512 sets 16-way set associative, 4 processors share 64-byte lines
- 32 KB L1 data cache, 128 sets 4-way set associative, 1 processor shares 64-byte lines
- 32 KB L1 instruction cache, 128 sets 4-way set associative, 1 processor shares 64-byte lines
|
RAM
|
- 4GiB DDR4
- But width: 32-bit
- Data Rate: 2640 MT/s
- Grade: PC4-21333
- Low Power Design: 1.2Volt
|
Storage
|
- 1x Micro SD Slot (Compatible with DS/HS mode and supports UHS-1 SDR104)
- 1x eMMC Socket (eMMC module is NOT included)
|
Networking
|
- 1x RJ45 GbE LAN Port | supports 10/100/1000 Mbps
- Supports WiFi USB adapters (NOT INCLUDED)
- RTL8211F Realtek Ethernet Transceiver
- Green LED: 100Mpbs connection data traffic indicator
- Amber LED: 1000Mpbs connection data traffic indicator
- 128 sets 4-way set associative, 1 processor shares 64-byte lines
|
Video
|
- 1x HDMI 2.0 Port with HDR, EDID, CEC | up to 4K @ 60Hz
|
Audio
|
- 1x HDMI Digital Audio Output
- 1x SPDIF (OPTIONAL) Optical Output
|
External I/O
|
- 1x OTG USB 2.0 Port for Device or Host Mode (DOES NOT support Power Input)
- 4x HOST USB 3.0 Ports (Single Root Hub Shared)
- 1x UART (Serial Console Debug)
- 1x 2.54mm Pitch 40-Pin Peripheral Expansion Header
- 8x GND
- 1x 1.8V DC
- 2x 3.3V DC
- 2x 5V DC
- 1x SPI
- 2x I2C
- 1x UART
- 6x PWM
- 2x 12-bit ADC input (up to 1.8V)
- Up to 25x GPIO
- 1x 7-Pin 2.54mm Pitch Audio Expansion Header
- 1x I2S
- 1x SPDIF Out
- 1x 5V DC
|
General
|
- IR receiver for infrared remote control
- System Indicator LEDs
- RED LED for PWR (DC Power Connected)
- BLUE (Kernel is running)
|
Power
|
- 1x DC Power Jack: 5.5mm (negative / outer) and 2.1mm (positive / inner) diameter
- 12V / 2A DC Power Adapter Recommended
- 5.5V ~ 15.5V DC Input
|
Form Factor
|
- Dimensions of the Heat Sink: 40mm x 32mm x 10mm | 4cm x 3.2cm x 1cm
- Dimensions of the Board: 85mm x 56mm x 1.0mm | 8.5cm x 5.6cm x 1cm
- Weight (including Heat Sink): 59 Grams | 0.059 Kg
|